R&D Process and Outsourcing management

Syscoset Electronics ltd. is offering various services in the field of research and development, process accompanying tests and aids in questions of process improvement and employer training.

The range of services reaches from components release tests, to the complete design and development of a product based on your ideas and from the training of your employers to process support to solve a given task.

TRAININGS by certified trainers

– IPC 610 A – Evaluation of printed boards

Duration of training 3 x 8 hours plus 1 x 4 hours test
Official IPC certificate issued, when test results confirmed by IPC
Price at request

– IPC 6677 – Rework and repair of assembled boards

Duration of training 3 x 8 hours plus 1 x 4 hours test
Official IPC certificated issued, when test results confirmed by IPC
Price at request

– IEC 61340-5-1 and 61340-5-2 Electrostatic Discharge

Duration of training 1 x 8 hours plus 1 x 1 hour for test
Certificate issued
Price at request

RESEARCH and DEVELOPMENT – Bringing your IDEA to life

– Component tests

Temperature and climatic test of alternative or new components for your application
EMC verification tests with the alternative component in your application
Test report for the performed tests

– Module/device tests

Temperature and climate simulation tests
EMC verification tests
Specialized custom designed test fixtures for specialized tests

– Layouting of printed circuit boards with 3D model of board

– Design and development of mechanical parts, required for the module

– Prototyping of boards and modules including STL-parts

– Developing a module based on ideas and book of requirements

PROCESS-Improvements and support

– ESD Audit based on IEC 61340-5-1 and 61340-5-

– Process and product audits based on

ISO 9001
ISO TS
ISO 14001

– Support for Audit certification

– Improvement of Key processes in electronic production

Surface mounted technology
Pin through hole technology
Wave soldering
Thermal profiling

– Cross section of wire crimp connections

– CPK-CMK analyses

– MSA analyses

Machine Service & Technical support

Support in maintaining and servicing production equipment of different producers
Training for predictive and preventive maintenance issues
CPK-CMK analyses
MSA analyses

Test possibilities

EMC

Surge test -1÷4kV,
Burst test – 0,5÷4kV,
ESD – 2÷15kV air discharge, 2÷10kV contact discharge,
Voltage dips, short interruptions and voltage variations immunity test.

HA1600 Power and Harmonics Analyzer

Limits for harmonic current emission;
Limitations of voltage changes, voltage fluctuation and flicker.

Climatic chamber – Environmental test

Temperature test – test conditions: temperature range – 40 ÷180degrees;
Climatic test – Temperature range +10 °C to +95 °C; Humidity range 10 % to 98 % r.h.

Development System near probe analysis of PCB

Comparative measurements of disturbances emitted by modules directly at the PCB.
SGZ 21 burst generator for examine the disturbance immunity during development and locate any weak points in the PCBs.

R&D Process and Outsourcing management

TRAININGS by certified trainers

RESEARCH and DEVELOPMENT – Bringing your IDEA to life

PROCESS-Improvements and support

Test possibilities

Our Mission

Where to find us

Downloads

Certificate